Frequently Asked Questions

What internals work with your frames?

METEOR frames fit 98 and newer style Autococker trigger plates, most standard sears, and standard sized roller sears. Be sure to check for proper fitment before purchasing for use in our frames.

What detents do your Autocockers use?

METEOR Autocockers use a dual rubber detent system. Replaceable rubber detents can be found in our parts section.

What Feednecks are compatible with the METEOR Lock Fit™ stub?

METEOR Autocockers are compatible with all Empire style feednecks.

What Pump Kits are compatible with METEOR Autocockers

METEOR Autocockers are designed to work with pre 2k threaded pump systems.

Are METEOR frames Autotrigger compatible?

Not right now, but we are working towards offering pump products to our customers in the future.

What screw type and sizes does the METEOR Autococker use?

Please visit our product manuals section under support for detailed exploded views and schematics.

How do I install the METEOR Red Chamber™ and valve system?

Please visit our product manuals section under support for detailed exploded views and schematics of the METEOR Red Chamber™ system.

Can I use another Valve in my METEOR Autococker?

Our valve system and the custom metric set screw that hold it are our specific to the Meteor platform, it is not recommended to modify this portion of the marker.

I have a small leak down my barrel?

This could be due to a groove not yet being formed in the cup seal allowing the valve to seal.  Here are a few solutions to try.  Check and re-grease the #15 o rings on the valve. Check the sealing surface of the valve for nicks that may be causing the problem.  Increase your regulator pressure to 450 and above and or dry fire the marker continuously to see if the leak stops.  Try a harder valve spring.  Let the marker sit gassed up overnight to help form the groove. If none of these solutions solve the problem or you need further help please contact us directly on our facebook @meteorpaintball or send an email to sales@meteorpaintball.com

Will METEOR produce complete Autocockers?

Eventually this is our goal, producing one part at at time towards a full gun. Follow along on our social media @meteorpaintball to be apart of this process.

Does METEOR offer custom milling for my project or gun?

Not as of now, but there are several great machinists in the Autococker community who specialize in this type of service.

Does METEOR offer custom anodization for my project or gun?

Not as of now, but once in awhile we will make available limited runs and exclusive colors directly through our website or facebook page.